Procedures/78th/General/FENCE
From SOURCE DCS WIKI
More actions
FENCE IN / FENCE OUT
A FENCE check is performed when entering (FENCE IN) or exiting (FENCE OUT) a hostile or combat area. It ensures all aircraft systems are configured for combat before the Timeline begins.
F-16 FENCE IN
| # | Item | Action |
|---|---|---|
| 1 | Lights | As required (master off or as briefed) |
| 2 | AVTR/DVR | As required |
| 3 | COMM / MSL / RWR Volume | As desired |
| 4 | ECM | As briefed |
| 5 | Stores Config switch | CAT I / CAT III as required |
| 6 | Master Arm | ARM |
| 7 | RWR | On / as desired |
| 8 | Master Mode | A/A |
| 9 | Radar | FCR, mode as required |
| 10 | CMDS | Program and mode as briefed |
| 11 | IFF | Set IAW mission card |
| 12 | Fuel | Check state; announce |
| 13 | SMS | Confirm weapon settings |
F-16 FENCE OUT
| # | Item | Action |
|---|---|---|
| 1 | Master Arm | SAFE |
| 2 | ECM | Off or as required |
| 3 | Radar | As required |
| 4 | Lights | As required |
| 5 | IFF | STBY or as required |
| 6 | CMDS | Safe as required |
Radio Call
Called on intraflight:
FLIGHT FENCE IN #2 #3 #4
Notes
- Master Arm ARM does not authorize weapon release. ROE and engagement authority still apply.
- CAT I = A/A stores only. CAT III = A/G stores or wing tanks.